Categories

Bathroom Faucet

View History

Your Position: Home > FAQ > FAQ > How To Install The LED Shower Heads

How To Install The LED Shower Heads

 

It is confused that the shower head is wrong or the light was turned off in your bathtime. Now, you don’t need to worry about these with the LED Shower Heads.

First, the led shower head does not need the baterry to light up the bathroom.

More information about the LED shower head:
A led shower head is one of the most recent innovations to come on to the market displaying 3 different colours which indicate the temperature of the water running.It changes color with the temperature of the water, ensuring you know by sight exactly what to expect before you jump in. Even flashes red if the water is too hot (above 46 deg C) so you do not burn yourself.

Led lighting in the home can change the appearance and atmosphere of a room cheaply and easily. Led lights for bathrooms can create a warm, relaxing glow as you relax in the bath and as they are totally waterproof there is no need to worry about ever splashing water on them. Even though your house’s power was cut off, the >3 Color LED Light Shower Head will light your bathroom up, you can continute to enjoy your bathtime.

Second, the led shower head is easy to install.
The bathroom shower have been called energy savers, but the proper name for them would probably be water savers, due to their function of allowing us to use less water than we would normally use. You can find these products at any store that sells plumbing supply, or at hardware and department stores.

But how to install it?

Step 1
Remove your existing shower head with a wrench. Set the wrench in place and turn the nut to the left to loosen it. Have a hand ready to catch the shower head when it falls so that the metal doesn't crack your shower floor.

Step 2
Clean the threads of the base of the shower faucet with steel wool. Be sure to remove any debris that had collected around the threads. It's a good idea to put down some newspaper or paper towels in the tub so that you can remove the debris instead of washing it down the drain.

Step 3
Wrap the faucet threads with thread tape. This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.

Step 4
Place a rubber "O"-ring inside the new shower head at any place that there is a water connection. This prevents a leaky faucet and improves water pressure.

Step 5
Tighten the hardware with a wrench. Turn the wrench to the right to to tighten. Test the Temperature Controlled Handheld Shower Head to make sure there are no leaks and that everything is working properly. Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.

What do you need to look for when Installing Shower?
When it comes to bathroom shower and especially to shower enclosures, make sure that the plastic laminate or the fiberglass inserts they are made of are correctly glued to the walls. The seams have to be properly sealed, so that the water cannot get behind the insert, be it made of plastic or fiberglass. There is obviously a difference in price between the plastic inserts and the fiberglass ones. As expected, the fiberglass shower insert is more expensive than its plastic counterpart. You may choose the variant that you wish but one condition has to be satisfied. Make sure that there is no water leakage after you have installed the shower insert.

(Total1User Comment Num)User Comment

  • Anonymous user ( 2015-07-08 10:04:42 )

    You really should have hired someone who spoke English to write the above article. It's pathetic and will probably drive people away from your site.

Username: Anonymous user
E-mail:
Rank:
Content:
Verification code: captcha